Crypto WF200 Guía de instalación descargar pdf (Pagina 18)

WF200 802.11g Wireless Router

IP address: Fill in IP address 192.168.1.x (x is a number between 2 to 254).

Subnet mask: Default value is 255.255.255.0.

Default gateway: Default value is 192.168.1.1.

Preferred DNS server: Fill in preferred DNS server IP address.

Alternate DNS server: Fill in alternate DNS server IP address.

You can use ping command under DOS prompt to check if you have setup TCP/IP

protocol correctly and if your computer has successfully connected to this router.

1) Type ping 192.168.1.1 under DOS prompt and the following messages will appear:

Pinging 192.168.1.1 with 32 bytes of data:

Reply from 192.168.1.1: bytes=32 times<2ms TTL=64

Reply from 192.168.1.1: bytes=32 times<1ms TTL=64

Reply from 192.168.1.1: bytes=32 times<10ms TTL=64

2) If the communication link between your computer and router is not setup correctly, after you

type ping 192.168.1.1 under DOS prompt following messages will appear:

Pinging 192.168.1.1 with 32 bytes of data:

Request timed out.

A connection error might be responsible for the unsuccessful connection between the PC and the

router.

For Windows Vista

Step 1: Click Start then select Control Panel (in the Classic View).

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 58 59

Sin comentarios

Crypto WF200 Guía de instalación Pagina 18